TELEPHONE COUNTER SURVEILLANCE
To Order Home Page info@thespystore.com QUESTIONS? CALL 509.238.5094
PROFESSIONAL SERIES WIRETAP DETECTOR
ONLY $399.00
Our new COMSEC-C3 Professional Series Wiretap Detector is the first and only security device that can detect legal and illegal wiretapping anywhere on the local telephone line including wiretapping at the telephone company's central exchange which was previously undetectable.
The COMSEC-C3 features:
Plug & Play Installation/Setup
Wiretapping Detection to the
Telephone Company's Central Exchange
Protects Telephone, Fax, and
Computer Dial-Up Communications
REMOBS (Remote Extension
Drawn Loops) Detection
Measures 3" x 5"
Telephone Line Powered
NOTE: The COMSEC-C3 will not detect business/home telephone recorders or wireless telephone transmitters. For this requirement, please see the SL-100.
The COMSEC-C3 comes complete with all necessary cords, 9V battery, instruction sheet, and a one year manufacturer's warranty.
***COMSEC-C3 -- Professional Series Wiretap Detector ----- $399.00
![]()
PROFESSIONAL SERIES TELEPHONE LINE ANALYZER AND TAP/TAPE RECORDER DEACTIVATOR
ONLY $279.00
Our new SL-100 Professional Series Telephone Line Voltage Analyzer and Tap/Telephone Recorder Deactivator provides unprecedented protection against telephone line taps and telephone line recorders as it is designed to remain connected to the telephone line and to constantly monitor the telephone line to ensure it is secure.
The SL-100 features:
Plug & Play Installation
LED 'Safe-Line' Indicator
On-Hook and Off-Hook Line
Voltage Monitoring
Built-In Digital Voltage
Display Screen (reflects any change in phone line voltage)
Automatic Conversation 'Mute'
Feature (activated by intrusion)
Automatic Deactivation of All
Known Wire-Tapping Devices
Creates Frequency Shift in
Crystal Line Transmitters
Automatic Activation of VOX
Telephone Recorders (when line not in use)
Automatic Deactivation of
Voltage-Sensing Telephone Recorders & Transmitters
100% State-Of-The-Art Digital Surface Mount
Technology
Fully Line Powered (no battery
or AC adapter required)
Measures 4.9" x 3.6" x 1.1"
NOTE: Use the TT-07 prior to connecting the SL-100 to your telephone line to ensure that your starting line voltage reading (reference point) is an un-tapped reading (no wire taps or bugs on the telephone line).
The SL-100 comes complete with modular connector cable, instructions, and a one-year manufacturer's warranty.
***SL-100 -- Professional Series Telephone Line Analyzer ----- $279.00
![]()
![]()
TELEPHONE LINE WIRE TAP DETECTOR AND LINE VOLTAGE ANALYZER
ONLY $149.00
Our new TT-07 Telephone Line Wire Tap Detector and Line Voltage Analyzer detects on-premise and parallel wire taps, and will also check line voltage which makes it ideal for use with the SL-100 (ensures that your starting line voltage is for an un-tapped line).
The TT-07 features:
Plug & Play Installation
LED 'Line Clear' Indicator
Line
Voltage Analyzer
Telephone Line Connector
Alligator Clip Line Tester
Connector
100% State-Of-The-Art Digital Surface Mount
Technology
9V Battery-Powered (included)
Measures 5.4" x 2.75" x 1.1"
The TT-07 comes complete with modular connector cable, alligator clip connector, 9V battery, instructions, and a one-year manufacturer's warranty.
***TT-07 -- Telephone Line Wire Tap Detector & Line Voltage Analyzer ----- $149.00
![]()
![]()
ADVANCED WIRETAP DETECTOR
ONLY $279.00
The TT-46 is the only test set that lets you quickly and easily check both single and dual telephone line systems for series and parallel taps. It tests every possible combination of wires in a four wire cable. This test feature allows detection of some of the more sophisticated taps that use split pairs.
While not much can be done about down-line taps, the TT-46 will enable you to check your telephone lines for on-premises series and and parallel bugs and wiretaps. It also allows you to check your phone line for the most common types of hookswitch bypasses. (A hookswitch bypass is a modification to the telephone that causes the transmitter or receiver in the telephone handset to pick up room sounds and pass them down the phone line even with the phone hung up. A hookswitch bypass effectively turns the telephone into a room monitor that can be monitored from anywhere in the world).
The TT-46 detects series devices with a resistance of 10 ohms or more. (Most series taps have a resistance of over 100 ohms). It also detects parallel devices with a resistance of 65 megohms or less. (Most parallel taps are under 30 megohms). It can also detect certain capacitively coupled taps.
The TT-46 comes with a line monitor that enables you to check the wire pairs for the presence of room audio when the phones are hung up. (The presence of room audio on the phone line when the telephones are not in use is a sure sign of bugging). A line driver is part of the monitor function. The line driver is used to activate any voltage operated microphones, such as FET microphones, that may be connected to a pair of wires.
Powered by one 9 Volt battery (included), the TT-46 measures 7.0" x 4.6" x 2.25" (with cover closed) and weighs only 9 oz.
The TT-46 comes complete with an illustrated instruction manual, all necessary cords, plugs, and adapters, and a one year manufacturer's warranty.
***TT-46 -- Advanced Wiretap Detector ----- $279.00
![]()
![]()
PROFESSIONAL COUNTER SURVEILLANCE BROADBAND RECEIVER
ONLY $1,499.00
Developed for Israeli military counter surveillance, the new CSR-PRO Counter Surveillance Broadband Receiver is a military/government grade broadband receiver designed to detect and locate all major types of electronic surveillance devices including room, phone, body bugs, video transmitters, and tape recorders.
Broadband receivers such as the CSR-PRO provide a very important cost-effective tool for professional sweep teams, government security personnel, and private citizens with important security needs.
The CSR-PRO is very effective for rapidly detecting and locating transmitted signals, while being very easy to learn to use. The CSR-PRO sweep kit includes a custom hard-shell case that contains all items necessary to conduct a professional sweep.
The CSR-PRO Counter Surveillance Broadband Receiver Features:
Total RF Spectrum Coverage (400KHz to 8.5GHz)
VLF Spectrum Coverage (20KHz to
400KHz)
Full Carrier Current Detection
(20KHz to 1MHz)
High RF Sensitivity (locates audio
transmitters as low as 1mW)
Adjustable RF Gain Control
Built-In Audio Filter (used to
accentuate voice frequencies and remove noise)
Detection and Monitor Mode
Audible Tone Alert or Silent Alert
(flashing LED)
Status Display
Probe Input
Headphone Input (for silent
detection/monitoring)
LCD Bar Graph (18 segment with
pulsing single segment trip point)
Input Level Bar Graph (indicates
signal strength of probe and auxiliary inputs)
Adjustable Threshold Control (sets
the 'trip' point for the monitor mode)
Adjustable Volume Control
(controls the audio gain to the speaker or headphone output)
Locates Hidden Telephone, Room,
and Body-Worn Audio Transmitters
Locates Remote Control Signals
Locates Computer, Fax, and Telex
Transmitters
Locates Video Transmitters
Locates Pulsed Tracking
Transmitters
Locates Wide Band Frequency
Hopping Transmitters
Locates VLF (very low frequency)
Carrier Current Transmitters
Locates 'Burst' Transmitters
Audio Verification Test Mode
(allows user to hear audio transmitter audio)
Infrared Light Detection
Laser Beam Detection
RF Probe (included)
VLF Probe (included)
IR Probe (included)
Carrier Current Probe (included)
Hard-Shell Carrying Case
Detailed Instruction Manual
Low Battery Indicator (triggered
at 30% power)
Battery Powered (8 AA alkaline or
NiMH (10-16 hour life) -- not included)
Measures 8" x 7.3" x
2.2" (205mm x 185mm x 56mm)
The CSR-PRO Counter Surveillance Broadband Receiver comes complete with a RF probe, VLF probe, IR/carrier current probe, phone line injection unit, stereo headphones, hard-shell carrying case, operating manual, and a one-year manufacturer's warranty.
***CSR-PRO -- Professional Counter Surveillance Broadband Receiver ----- $1,499.00
![]()

![]()
PROFESSIONAL COUNTER SURVEILLANCE PROBE/MONITOR
ONLY $2,399.00
The CPM-700 is a broadband receiver designed to detect and locate all major types of electronic surveillance devices including room, phone, body bugs, video transmitters, and tape recorders.
Broadband receivers such as the CPM-700 provide a very important cost-effective tool for professional sweep teams, government security personnel, and private citizens with important security needs.
The CPM-700 is very effective for rapidly detecting and locating transmitted signals, while being very easy to learn to use. The CPM-700 sweep kit includes a custom Cordura case that contains all items necessary to conduct a professional sweep.
The CPM-700 Features:
Total RF Spectrum Coverage (200KHz to 3GHz)
Full Carrier Current Detection
(15KHz to 1MHz)
High RF Sensitivity (locates audio
transmitters as low as 1mW)
Adjustable RF Gain Control
Built-In Audio Filter (used to
accentuate voice frequencies and remove noise)
Search or Monitor Mode
Audible Tone Alert or Silent Alert
(flashing LED)
Status Display
Probe Input
Headphone Input (for silent
detection/monitoring)
LCD Bar Graph (18 segment with
pulsing single segment trip point)
Input Level Bar Graph (indicates
signal strength of probe and auxiliary inputs)
Adjustable Threshold Control (sets
the 'trip' point for the monitor mode)
Adjustable Volume Control
(controls the audio gain to the speaker or headphone output)
Built-In Speaker
Locates Hidden Telephone, Room,
and Body-Worn Audio Transmitters
Locates Remote Control Signals
Locates Computer, Fax, and Telex
Transmitters
Locates Video Transmitters
Locates Pulsed Tracking
Transmitters
Locates Wide Band Frequency
Hopping Transmitters
Locates VLF (very low frequency)
Carrier Current Transmitters
Locates 'Burst' Transmitters
Audio Verification Test Mode
(allows user to hear audio transmitter audio)
Infrared Light Detection (with
optional IRP-700 Infrared Probe)
Laser Beam Detection (with
optional IRP-700 Infrared Probe)
RF Probe (included)
Soft-Shell Carrying Case
Detailed Instruction Manual and
Video manual (on VHS tape)
12V AC Adapter Powered (included)
or Battery Powered (8 AA batteries)
The CPM-700 Basic comes complete with a RF probe, VLF probe, headphones, soft-shell carrying case, operating manual, VHS instruction tape, 'alligator clip' lead, and a one-year manufacturer's warranty.
The CPM-700 Advanced comes complete with a RF Probe, VLF Probe, IRP-700, MLP-700, ALP-700, MPA-700, TRP-700, CLA-700, headphones, Ni-Cad rechargeable batteries, soft-shell carrying case, operating manual, VHS instruction tape, 'alligator clip' lead, and a one-year manufacturer's warranty.
The CPM-700 Deluxe comes complete with a RF Probe, VLF Probe, BMP-1200, IRP-700, MLP-700, ALP-700, MPA-700, TRP-700, CLA-700, headphones, Ni-Cad rechargeable batteries, soft-shell carrying case, operating manual, VHS instruction tape, 'alligator clip' lead, and a one-year manufacturer's warranty.
***CPM-700 -- Professional
Counter Surveillance Probe/Monitor (Basic) ----- $2,399.00
***CPM-700 -- Professional Counter Surveillance Probe/Monitor (Advanced) -----
$2,899.00
***CPM-700 -- Professional Counter Surveillance Probe/Monitor (Deluxe) -----
$4,699.00
***BMP-1200 -- CPM Broadband Microwave Probe (up to 12GHz) ----- $1,899.00
***IRP-700 -- CPM Infrared Probe ----- $189.00
***MLP-700 -- CPM Magnetic Leakage Probe ----- $199.00
***ALP-700 -- CPM Acoustic Leakage Probe ----- $149.00
***MPA-700 -- CPM Modular Phone Adapter ----- $59.00
***TRP-700 -- CPM Tape Recorder Patch Cable ----- $19.00
***CLA-700 -- CPM Cigarette Lighter Adapter ----- $29.00
***BAT-AARC -- AA Rechargeable Batteries & Charger (2000mAh, 4-pack) -----
$29.00
***BAT-AAR -- AA Rechargeable Batteries (2000mAh, 4-pack) ----- $19.00
![]()
Click your BACK button to return to the Counter Surveillance Equipment Index
QUESTIONS? CALL 509.238.5094